 |
Products
Concrete and Mortar AdmixturesMould Release Agents and Curing CompoundsGrouts & Grout AdmixturesStone / Tile Adhesives & GroutsPU Foams & PU Resins For WaterproofingWaterproofing and Protective CoatingsIndustrial Flooring, Coating, Hardeners & Repair SystemsSelf Leveling Cementitious MortarSeals & Dust ProoferEpoxy FlooringDecorative FlooringEpoxy CoatingPolyurethane CoatingFloor Hardeners & Floor Repair SystemSelf Levelling Cementitious MortarsSealers & DustproofersHigh Temperature FlooringAnti Corrosive CoatingsRepairs & MaintenanceMiscellaneousPlasticizers
Showcase View all our products / services as a slide show.
 Hot Offers
|
|
Industrial Flooring, Coating, Hardeners & Repair Systems
We offer industrial floorings & epoxy coatings, which are used to repair worn areas, holes or depressions in concrete floors of factories, warehouses, storage areas, paving blocks, drive ways, car parking, decks and garage floors. Excellent for hardening of new and old concrete surfaces, the range is provided in various packaging applications. Under the brand name of Coreflor, Corecryl & Corecoat, the range includes: COREFLOR PATCHREP | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | It is used for Concrete floor repair system which contains adhesive primer and special mortar mix. | Good for repair of worn areas, holes or depressions in concrete floors, factories, warehouse and storage areas. Can be used in floors, factories, warehouse and storage areas. Traffic can be commenced after 24 hrs. | 1 bag gives appr. 13.00 litres with specified water / powder ratio. | 25 Kgs | • Sealers & Dustproofers • Self-Leveling Cementitious Mortar • Epoxy Flooring • Decorative Floors • Epoxy Coatings • Polyurethane Coatings |
View Enquiry Basket
| Self Leveling Cementitious Mortar We offer our clients with self levelling cementitious mortars at highly competitive prices. These are being made of high graded raw material by using Zero error procedures. These mortars are offered with customized solutions for their efficient and hassle free usage.The range includes underlay & Overlay application for various uses.It can be supplied in colours on request.
|
| Seals & Dust Proofer We manufacture and supply a wide range of Seals & Dust Proofers for our clients in domestic and international market. We perform various stringent quality tests before supplying these to our clients. The important information about these is mentioned below: COREFLOR DUSTPROOFER | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | High performance lithium based hardener, strengthener and densifier for concrete floors | For surface hardening of new & old concrete to prevent dust generation reduce wear particularly on exposed surfaces. Typical application areas include warehouse, factories,platforms on both new & existing concrete surfaces where epoxies are not desirable | 10 – 12 sq.m. / ltr. | | CORECRYL SEALER | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Corecryl sealer is a liquid, membrane-forming sealing compound for concrete. It protects new concrete and reduces crazing, spalling and flaking on the surface. It has a good abrasion resistance and is typically used in decorative stamp concrete, paving blocks etc. | Interior and exterior concrete; Paving blocks, inter-locking tiles; Stamp concrete; Drive ways, car parking, decks and garage floors | 5-9 sq.m./ltr. Depending on surface texture | |
|
| Epoxy Flooring We provide our clients with a qualitative assortment of epoxy flooring that is widely used in the construction industry. These are manufactured as per the industrial standards and are provided to our clients in customized forms. The details of this range are as follows:
COREFLOR SL
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Three component self leveling epoxy floor topping to provide dust-free, chemical and abrasion resistant, joint-less and seamless surface. | Ideal flooring for pharmaceutical, food processing and packaging industries, electronic assembly areas, automobile plants auto-anciliaries and light-engineering industries | 14 Kg pack will cover approx. 4 sq.m for 2mm thick floor | 15 Kg |
COREFLOR SLC
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component self leveling epoxy floor coating to provide dust-free, chemical and abrasion resistant, joint-less and seamless surface. | Unique economical & brushable floor coating, ideal for electronic assembly areas, service stations, utility areas, auto-anciliaries and light-engineering industries, where light traffic is expected. | 2 Kg unit will cover approximately 5 sq.m in two coats. | 15 Kg |
COREFLOR SF
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Three component epoxy screed mortar to provide tough, abrasion resistant, joint-less and seamless surface. | Ideal for warehouses, parking decks,loading bays and other areas where medium to heavy traffic is expected | 20 Kg pack will cover approx. 2 sq.m for 5mm thick floor. | 20Kg |
COREFLOR ECC
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Three component epoxy-cement composite mortar to provide tough, abrasion resistant, joint-less and seamless surface to resist moisture-vapour rise and to provide leveled surface. | Ideal topping over damp concrete as well as for old concrete floors. Unique water-based epoxy polymer system to breathe out moisture vapour.Very economic solution to repair | 25 Kg pack will cover approx. 6 sq.m for 2mm thick floor. | 25Kg |
|
| Decorative Flooring Our gamut of decorative floor systems is designed as per the specific requirements of our clients. These systems are utilized in residential as well as commercial sectors and are offered to our clients in the following types and specifications: COREFLOR UNIQUE - Designer's Choice | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Different flooring systems with various designs, colours and concepts to provide custom-made floors | Ideal for lobbies, porches and shopping areas of malls, multiplexes, hotels where aesthetics and fuctionality are to co-exist. | As required | Customised packing | COREFLOR DECO | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Comprising of Powder, release and sealer, this unique system transforms a normal concrete into a work-of-art. Available in a variety of colours and designs | Ideal for pathways, basement parkings and exterior floors of malls, multiplexes, hotels where aesthetics and fuctionality are to co-exist. Provides an antiskid, coloured surface with an easy-to-maintain concrete surface. | As required | Customised packing |
|
| Epoxy Coating We formulate and provide superior quality range of epoxy coating that is applicable in building arena. These coatings are prepared in accordance to the industrial norms and are available for our clients in standards and customized forms.
Below mentioned are the types and specifications of this range:
CORECOAT FC150
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component high solids, epoxy floor coating to provide dust-free, chemical and abrasion resistant surface. | Brushable floor coating, ideal for electronic assembly areas, service stations, utility areas, auto-anciliaries and light-engineering industries, where light traffic is expected. | Approx 6-8 sq.m per Kg per coat and two coats will give a DFT of 120-150 microns | 15 Kg |
CORECOAT FC350
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component solvent-free epoxy floor coating to provide dust-free, chemical and abrasion resistant surface. | Brushable 100% solid floor coating, ideal for electronic assembly areas, service stations, utility areas, auto-anciliaries and light-engineering industries, where light traffic is expected. | Approx 3-4 sq.m per Kg per coat and two coats will give a DFT of 200-300 microns | 15 Kg |
CORECOAT FC111/150/350
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | A solvent based, two pack system based on epoxy resin and amine curing agents floor coating specifically chosen for their ability to withstand high degree of chemical attack. The cured film is hard but flexible with excellent adhesion to clean concrete, sand / cement and grano screeds and certain metal surfaces. | Recommended for clean environment in industries like automobile, dairies, soft drinks production, etc. where only foot traffic is expected | 5 kg pack covers approx. 35 m2 per coat at 50 micron dft. | 5 Kg |
CORECOAT WBC
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component high-solids water-based epoxy coating to provide hygienic, tough, chemical resistant surface, that can be applied on damp surafce. | Generally suitable for walls, ceiling and other areas where dampness/new concrete does not allow use of solvent-based coating.Provides washability, aesthetics and chemical-resistant surface and VOC compliant. | 1 Kg will cover approx. 5 sq.m in 2 coats (depending on surface) | 15 Kg |
|
| Polyurethane Coating Capitalizing on our cutting edge technology and industrious workforce we are able to formulate a qualitative range of polyurethane coating. Our regular testing in preparation of these coatings enables us to offer a range which is at par with industrial standards.
The types offered in this range are as follows:
CORECOAT PU150
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component, aliphatic high-solids polyurethane coating ideally suitable for exterior and interior applications | Available in various colours, it is suitable to be applied both on walls and floors, providing very good washability, aesthetics, chemical and abrasion resistance. | Approx.4.0 sq.m. / kg on uniform surface | 15 Kg |
CORECOAT PU171
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Single component polyuratehene coating for the protection of wood,plwood,teak veneer etc. | Transparent coating for keeping the natural finish as it is.Makes wood water-resistant. | App.8-10 sq.m/per coat depending on the surface. | 20 Kg |
CORECOAT PUW
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Single component high-solids water-based PU coating to provide hygienic, tough, chemical resistant coating, that can be applied on damp surafce. | Generally suitable for walls, ceiling and other areas where dampness/new concrete does not allow use of solvent-based coating. Provides washability, aesthetics and chemical-resistant surface and VOC compliant. | 1 Kg will cover approx. 5 sq.m in 2 coats | 20 Kg |
CORECOAT PU CLEAR
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | CORECOAT PU Clear is an acrylic-aliphatic PU coating to provide glossy and non-yellowing coating both for exterior as well as critical interior applications. | In addition to having good gloss retention, it is most suitable as a top coat for hygiene and asceptic areas. | 1 Kg will cover approx. 5 sq.m in 2 coats | 20 Kg |
COREFLOR PU110
| DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Two component,polyurethane system acting as a sealer coat by protecting the surface from penetration of oils & liquids | suitable for warehouses,garages,indoor Car parks ,Light industries etc. | Approx.6 sq.mt/litre/coat | 1 & 5 Litre Pack |
|
| Floor Hardeners & Floor Repair System We specialize in formulating and supplying a wide range of floor hardeners and floor repair systems that are made from superior quality raw material. These floor hardeners and floor repair systems are offered to our clients at most competitive prices. The details of this range are mentioned below: COREFLOR HS TOP | DESCRIPTION | APPLICATION | COVERAGE | PACKING | | Iron aggregate topping combining graded iron aggregates, cement and chemical agents. Ideal floor topping/repair mortar for old floors to impart abrasion and impact resistance. | Suitable for warehouses, loading docks, high-traffic aisle-ways, cylinder-handling areas, maintenance garages with heavy machinery. | 35 Kg/sq.m for 13mm thick topping | 25 Kgs. |
|
| Self Levelling Cementitious Mortars Rapid hardening self leveling,single component cementitious underlay.Underlayment for floor coverings such as carpet,ceramic tiles,vinyl etc.Can also be used for flat smooth surfaces over existing residential,commercial & medium industries etc.
Other Information - Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
- Packaging Details: Coverage/Dosage:3.3sq.m/20kgs.pack@ 4mm thickness.
|
| Sealers & Dustproofers Coreflor (STD)
A quality controlled factory blended powder for ready to use on site.It bonds monolithically to provide a dense non porous surface.Additional increase ofe over 150% abrasion resistance than normal concrete.Good for pavements,railway platforms,foot bridges,industrial floors etc.
Other Information - Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
- Packaging Details: 25kgs;Coverage/Dosage:typical concrete mix should have a minimum of 300kg./m cube cement & a maximum W/C ratio in the range of 0.55.
|
| Sealers & Dustproofers Coreflor (EHD)
A quality controlled factory blended powder with a non-rusting metal particles for ready to use on site for heavy duty floors.It bonds monolithically to provide a dense non porous surface.Additional increase of over 700% abrasion resistance than normal concrete.Good for pavements,railway platforms,foot bridges,industrial floors etc.Resistance to oil penetration.
Other Information - Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
- Packaging Details: 25kgs.Coverage/Dosage:Typical concrete mix should have a minimum of 300kg/m cube cement & a maximum W/C ration in the range of 0.45 to 0.55.
|
| Sealers & Dustproofers Coreflor(HD)
Carborundum based,non-oxidising,dry-shake floor hardener suitable to be broadcast for both VDF & IPS floors to improve abrasion resistance upto 6times that of control concrete.Ideally suitable for garages,ware-houses,depots,loading & unloading bays,parking decks etc;Can be used both for interior & exterior floors.Increases abrasion by over 500%
Other Information - Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
- Packaging Details: 25kgs.;Coverage/Dosage:3kg.per sq.m. for VDF floors & upto 5kg.per sq.m for non-VDF floors.
|
| High Temperature Flooring Coreflor TFD
A unique repair system for floors subjected to a temperature of over 1000 degree.With a complex blend of special graded aggregates,cements & additives,it offers high resistant to heat,abrasion & impact.Useful in metal smelting areas,foundries,casting plants & any areas where high temp materials are being handled.
Other Information - Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
- Packaging Details: 30 kgs.;Coverage/Dosage: 30kgs.per sq.m for 12.5mm thick.
|
|
 |
© Build Core Chemicals, All Rights Reserved. (Terms of Use)